XIN BAO
GRADE BMonday, September 22, 2025
Violations Cited
10F
Non-food Contact Surfaces Not Clean
Non-food contact surface or equipment made of unacceptable material, not kept clean, or not properly sealed, raised, spaced or movable to allow accessibility for cleaning on all sides, above and underneath the unit.
INDIRECT CONTAMINATION: Dirty non-food surfaces harbor pests and bacteria. Employees touch these surfaces then food. Accumulation attracts roaches and rodents. Creates reservoir of contamination that spreads throughout facility.
Clean all non-food surfaces regularly: Walls, ceilings, floors daily in food areas, Equipment exteriors, Storage shelves, Light fixtures monthly. Seal cracks. Repair damaged surfaces. Maintain cleaning schedule. Assign responsibilities.
02H
Food Not Cooled by Approved Method
After cooking or removal from hot holding, TCS food not cooled by an approved method whereby the internal temperature is reduced from 140 °F to 70 °F or less within 2 hours, and from 70 °F to 41 °F or less within 4 additional hours.
TOXIN PRODUCTION: Slow cooling is the #1 cause of foodborne outbreaks. Clostridium perfringens spores survive cooking and germinate during slow cooling, producing heat-stable toxin. Causes 'buffet illness' affecting hundreds at events. Staph aureus produces toxin that CANNOT be destroyed by reheating.
Cool using approved methods: Shallow pans (2 inches max depth), Ice baths with frequent stirring, Ice paddles, Blast chillers, Cut large items into portions. NEVER cool at room temperature. NEVER stack hot containers. Document cooling times and temperatures.
10B
Plumbing Not Properly Installed or Maintained
Anti-siphonage or back-flow prevention device not provided where required; equipment or floor not properly drained; sewage disposal system in disrepair or not functioning properly. Condensation or liquid waste improperly disposed of.
WATER CONTAMINATION: Backflow can siphon sewage into water supply, contaminating entire facility. Cross-connections spread pathogens throughout plumbing. Sewage backups create immediate health hazard. Can affect hundreds through contaminated water.
Install backflow preventers on ALL required fixtures. Maintain air gaps (2x pipe diameter minimum). Fix all leaks immediately. Ensure proper drainage - no standing water. Regular plumbing inspection. No direct connections between sewage and water supply.
08A
Facility Not Free from Harborage Conditions
Establishment is not free of harborage or conditions conducive to rodents, insects or other pests.
PEST ATTRACTION: Harborage conditions support pest infestations. Gaps allow entry of rodents carrying 35+ diseases. Standing water breeds flies that spread 100+ pathogens. Clutter provides nesting for pests. Creates ongoing contamination risk.
Eliminate ALL harborage conditions: Seal cracks/holes (1/4 inch for mice, 1/2 inch for rats), Fix leaking pipes, Remove clutter/unused equipment, Eliminate standing water, Clean grease accumulation, Maintain 6 inches clearance from walls, Remove cardboard storage.
04L
Evidence of Mice Present in Facility
Evidence of mice or live mice in establishment's food or non-food areas.
WIDESPREAD CONTAMINATION: Mice produce 50-75 droppings daily, each containing Salmonella, Hantavirus. One mouse contaminates 10x more food than it eats through droppings and urine. Mouse allergens trigger asthma. Can infest entire facility in weeks.
Eliminate immediately: Clean all droppings with bleach solution, Seal ALL holes over 1/4 inch, Remove nesting materials, Professional treatment if >10 droppings found, Discard contaminated foods, Install traps/bait stations, Deep clean entire facility.
Violations were cited in the following area(s).